LightSpeed1
Apr 7, 08:46 PM
Check out PowerSupport. I love their products.
alex011
May 2, 08:48 PM
Hey guys,
I've been using my air to connect my xbox to xbox live as i dont have a wireless adapter and the router is unreachable by cable.
I've had a fair few problems achieving this, however i have had it working.
However now my mac isn't recognizing the ethernet cable. It claims the cable is unplugged or the device on the other end isn't responding. However in 'networking' under 'system preferences' it would normally show an amber light if this was the case. (currently shows the red dot)
i currently have the IPv4 set to manual with my ip at 10.0.0.1, subnet at 255.255.255.0 and internet sharing set as on.
I'm confused as to why when it has been working before it has suddenly stopped, and why the mac isn't recognizing it at all. I've also tried restarting.
Can anybody help?
(have the USB Ethernet adapter fyi)
I've been using my air to connect my xbox to xbox live as i dont have a wireless adapter and the router is unreachable by cable.
I've had a fair few problems achieving this, however i have had it working.
However now my mac isn't recognizing the ethernet cable. It claims the cable is unplugged or the device on the other end isn't responding. However in 'networking' under 'system preferences' it would normally show an amber light if this was the case. (currently shows the red dot)
i currently have the IPv4 set to manual with my ip at 10.0.0.1, subnet at 255.255.255.0 and internet sharing set as on.
I'm confused as to why when it has been working before it has suddenly stopped, and why the mac isn't recognizing it at all. I've also tried restarting.
Can anybody help?
(have the USB Ethernet adapter fyi)
logana
Apr 8, 04:44 PM
Now that was the second HD that she had crash on her with that macbook. Is this generally an issue for these?
The screen flickers, mostly after it wakes up or turns on for the first time. It flickered before I had the new HD in and installed snow leopard as well. From reading other posts, it seems like this may be the inverter board. Is that a hard fix?
OK...discuss. Thanks!
Hard disk - yes Apple had a recall for many of the MacBooks built around that time but hard disks fail on anything especially laptops ...
The screen flicker is more likely to be the inverter to logicboard cable - they fray - does it flicker when you move the screen up and down on it's hinges ??
If so it will be the cable -- instructions on ifixit.com
The screen flickers, mostly after it wakes up or turns on for the first time. It flickered before I had the new HD in and installed snow leopard as well. From reading other posts, it seems like this may be the inverter board. Is that a hard fix?
OK...discuss. Thanks!
Hard disk - yes Apple had a recall for many of the MacBooks built around that time but hard disks fail on anything especially laptops ...
The screen flicker is more likely to be the inverter to logicboard cable - they fray - does it flicker when you move the screen up and down on it's hinges ??
If so it will be the cable -- instructions on ifixit.com
cluthz
May 1, 02:41 PM
It's very likely the PSU is dead, it could be the
Here is a guide to replace it:
http://www.ifixit.com/Guide/Repair/Installing-iMac-Intel-20-Inch-EMC-2105-and-2118-Power-Supply/1098/1
(White 2006 iMac 20-inch, look around the site for other models if this isn't yours)
Getting a new one from apple will most likely cost you around $500, but it should be able to get one for about $100 used, but with some risks.
Did a quick google and here is a new one for $118:
http://www.galaxyhp.com/b17in-and-20in-iMac-Intel-2006-White-Casebbr185W-Apple-Power-Supply-New_p_366.html
I don't know anything about the shop that sels it tho.
Here is a guide to replace it:
http://www.ifixit.com/Guide/Repair/Installing-iMac-Intel-20-Inch-EMC-2105-and-2118-Power-Supply/1098/1
(White 2006 iMac 20-inch, look around the site for other models if this isn't yours)
Getting a new one from apple will most likely cost you around $500, but it should be able to get one for about $100 used, but with some risks.
Did a quick google and here is a new one for $118:
http://www.galaxyhp.com/b17in-and-20in-iMac-Intel-2006-White-Casebbr185W-Apple-Power-Supply-New_p_366.html
I don't know anything about the shop that sels it tho.
daneoni
May 6, 09:22 PM
This is likely why you can access it from home.
Here are the actual HE discount for the iMac and AppleCare
Enjoy.
EDIT: No worries.
Here are the actual HE discount for the iMac and AppleCare
Enjoy.
EDIT: No worries.
Jacko30
Apr 21, 08:01 AM
If the data doesn't need to be dynamically updated why not just export the data as HTML (write scripts to create these files when needed) and cut out any other database. You could break it into chunks to ease navigation and have a preprepared index page that links to the exported files which you could upload to your website. I don't think it would look that pretty, but would be quick and functional.
That could be a possiblity, simple too. Coupled with a CSS I can try and make it work. Thanks. Willing to accept alternatives too
That could be a possiblity, simple too. Coupled with a CSS I can try and make it work. Thanks. Willing to accept alternatives too
mad jew
Dec 19, 01:09 AM
Have you called Apple about a replacement? I'd keep it personally.
gameface
Apr 27, 01:02 PM
Do you have a CF reader?
If you do:
Put card in
open it up on your desktop
drag and drop all contents to your internal hard drive
drag and drop to your external
This will give you 2 complete copies of your raw
If you don't:
transfer footage with the utility to your internal
Then drag and drop all media onto external
This will also give you 2 copies of your raw
Transcode raw only on the drive you are working with. If you need to relink to your backup later, you will have to transcode that when the time comes. But I would keep my backup as 100% raw original files.
NOTE: Don't ever change file names when you import. Use log notes for labeling. If you rename anything and your normal copy gets screwed, it will be a major PITA to relink with your media with the backup.
NOTE2: You should never work off your internal drive so I would technically replace the word "internal" above to "other external device".
If you do:
Put card in
open it up on your desktop
drag and drop all contents to your internal hard drive
drag and drop to your external
This will give you 2 complete copies of your raw
If you don't:
transfer footage with the utility to your internal
Then drag and drop all media onto external
This will also give you 2 copies of your raw
Transcode raw only on the drive you are working with. If you need to relink to your backup later, you will have to transcode that when the time comes. But I would keep my backup as 100% raw original files.
NOTE: Don't ever change file names when you import. Use log notes for labeling. If you rename anything and your normal copy gets screwed, it will be a major PITA to relink with your media with the backup.
NOTE2: You should never work off your internal drive so I would technically replace the word "internal" above to "other external device".
trainwrecka
Jul 20, 11:03 AM
The walmart on the beach side will have 2. Yes 2. I'm here now using my phone to check the forum. I'm still the only person so someone come claim spot #2. Bring a pillow and a sleeping bag or something and a deck of cards lol. I need some company. The associate told me people keep calling but no one has came yet.
Did you wait and get the phone? Were they the 32GB models? We came up the next morning - early, but 2 peeps already had them claimed.
Did you wait and get the phone? Were they the 32GB models? We came up the next morning - early, but 2 peeps already had them claimed.
DennisMadsen
May 4, 03:38 PM
I think I'll go for the Corsair RAM. What about the 2x2GB of standard Apple RAM. I'll have to take them out and insert my 2x4GB instead? 2x2GB+2x4GB will not work - correct?
ucfgrad93
Apr 14, 11:31 PM
Wow, that is too funny.:D
Kaushal
Oct 11, 01:00 AM
my uncle is going to HK :D
i will try if i can sell this handset for a decent rate, then i may ask him to get 1 from there :p
i will try if i can sell this handset for a decent rate, then i may ask him to get 1 from there :p
nofunsir
May 7, 01:31 AM
1) Open terminal.
2) Paste this:
echo sometemporarytext > ~/Desktop/opensesame.command; chmod +x ~/Desktop/opensesame.command
3) Open opensesame.command (it should be on your desktop) in your favorite text editor (right click, open with...).
4) Replace "sometemporarytext" with:
echo perl /Path/to/A.pl > launchA.command; #make some temporary bash scripts to open your...
echo perl /Path/to/B.pl > launchB.command; #...perl scripts, one per perl script that you...
echo perl /Path/to/C.pl > launchC.command; #...want in a new window.
chmod +x launchA.command; #make sure each of these scripts are executable
chmod +x launchB.command;
chmod +x launchC.command;
open launchA.command; #open each script in a new terminal window
open launchB.command;
open launchC.command;
sleep 1; #wait 1 second before continuing (to avoid deleting the launchers before they have a chance to execute)
rm launchA.command; #delete launchers
rm launchB.command;
rm launchC.command;
5) Save and close your text editor.
6) You are now free to double-click opensesame.command
2) Paste this:
echo sometemporarytext > ~/Desktop/opensesame.command; chmod +x ~/Desktop/opensesame.command
3) Open opensesame.command (it should be on your desktop) in your favorite text editor (right click, open with...).
4) Replace "sometemporarytext" with:
echo perl /Path/to/A.pl > launchA.command; #make some temporary bash scripts to open your...
echo perl /Path/to/B.pl > launchB.command; #...perl scripts, one per perl script that you...
echo perl /Path/to/C.pl > launchC.command; #...want in a new window.
chmod +x launchA.command; #make sure each of these scripts are executable
chmod +x launchB.command;
chmod +x launchC.command;
open launchA.command; #open each script in a new terminal window
open launchB.command;
open launchC.command;
sleep 1; #wait 1 second before continuing (to avoid deleting the launchers before they have a chance to execute)
rm launchA.command; #delete launchers
rm launchB.command;
rm launchC.command;
5) Save and close your text editor.
6) You are now free to double-click opensesame.command
da2005pizimp
Jun 29, 12:28 PM
what version ps3 is it? also who is the warranty from and is it transferable? highly interested.
Christina1971
Apr 13, 06:49 AM
Who says there's definitely a refresh coming in June? That's still a rumor, right? But if you're asking the question, that means you probably don't need the computer now and can wait. There'll always be something better around the corner, though, so you can be waiting for a long time.
m1ndgam3z
Apr 19, 12:23 PM
I don't think so.
Yesteday I was in Amazon looking for cases, and I searched iFrogz ones.
There were some bad reviews, like case broke about a month after buying it.
He was asking about Screenshields I think. But I like the cases nonetheless lol
Yesteday I was in Amazon looking for cases, and I searched iFrogz ones.
There were some bad reviews, like case broke about a month after buying it.
He was asking about Screenshields I think. But I like the cases nonetheless lol
vtnangel
May 5, 05:52 PM
i do and when i tried to use internet on the bus without wifi, the screen would usually show that webtogo thing that you have to change settings (just to try it out when i first got an iphone). but now when i go on it doesn't block me from the internet anymore. like it lets me use it on the bus even though i never payed for web plan outside of wi-fi. and now when i check the online bill it says i used like .009 megabytes for example, at 1:30 am in the morning and other times when i don't use the internet. and i think they charge me a lot for 1 megabyte.
im just wondering does anyone's internet do this? is it my iphone or is it tmobile change their settings? thanks
im just wondering does anyone's internet do this? is it my iphone or is it tmobile change their settings? thanks
Blue Velvet
Jan 19, 02:36 PM
Garand, your wife is making life difficult for herself. This is where it all is:
Photoshop > Menu: File > Automate > Batch...
With some batch-processing, you may have to set up an action first in the Actions palette.
Photoshop > Menu: File > Automate > Batch...
With some batch-processing, you may have to set up an action first in the Actions palette.
musicpenguy
Oct 19, 09:17 AM
The iPad dock works like a charm with the new iPod touch
heylookitskarl
Feb 23, 05:00 PM
If your resume and cover letter go to Apple Corporate in Cupertino CA and the formatted version of your resume goes to a recruiter (who invites you to the recruiting seminar), would it be possible for Apple Corporate to screen your resume and cover letter before the recruiter? Then (theoretically) the application would go to a store Hiring Manager who will then call you in for an interview.
kretzy
Dec 19, 09:48 PM
And another....
I think I prefer the static one best though.
I think I prefer the static one best though.
evq
Mar 11, 03:06 PM
All I can say is good luck. :-/ The line is growing pretty steadily and construction on 94 is a nightmare. They did say that they'll be coming through the line around 4 to give out a claim ticket for the model, color, etc
CBGFilms
May 4, 01:33 PM
I had an idea, in the iFixIt teardown they mentioned it is now possible to replace the graphics chips in the new iMac's, I would like to buy a base model iMac, �999. And then swap the graphics in for a AMD Radeon HD 6970M graphics chip with 1GB or 2GB memory.
But I can't find any chips online to buy? Can you not buy these?
But I can't find any chips online to buy? Can you not buy these?
Firefox123
Jan 20, 12:12 AM
I bought an iPod touch 4g 64gb on thanksgiving , that came factory installed 4.2.1, pc model... I was wondering if there was a reliable untethered jb that wouldn't slow down my iPod or drain the battery... I am on a pc, btw...
Thanks!
Thanks!
No comments:
Post a Comment